难检字字典在线查询

汉语拼音：lián gǎn

将机器转动部分的动力传到另一个往复运动部分（例如从曲柄销传到活塞）的刚性杆--亦称活塞杆。

1. 机械构件。把活塞的往复运动传给曲轴，或把曲轴的旋轴运动传给活塞的杆。

• A piston links to a drive shaft by means of a connecting rod.

  活塞通过连杆与驱动轴相连.

• The connecting rod may drive a valve stem directly.

  连杆可以直接带动阀门的把柄.

• The connecting rod is attached to the piston by the piston pin.

  连杆与活塞的连接是采用活塞销.

• The rod - bearing cap attaches the connecting rod to the crankpin.

  连杆轴瓦盖将连杆安装到曲轴销上.

• The thermostat is connected by a link to the carburetor.

  恒温控制器是由一根连杆与汽化器相连的.

• This device, which is represented in figure 17.3, consists of six links, a to f.

  图17.3所示即为此种装置, 它由自a至f的六根连杆所组成.

• By making a force triangle, the force in the connecting rod can be determined.

  作出力的三角形, 可以决定连杆中的力.

• The crank end of the connecting rod is sometimes called the rod " big end ".

  连杆的曲轴有时称为 “ 大头 ”.

• The cap and rod have bearings which permit the crankpin to rotate freely within the rod.

  轴瓦盖和连杆中有轴瓦,它允许连杆内的曲柄锁自由地转动.

• A link frame is set up using D - H notation.

  采用D-H方法建立起机器人连杆坐标系.

• Fuselage Body, Wings , Landing Skid , Propeller, landing Wheels, Linkage Rod, Cabin.

  机身 、 机翼、起落架 、 螺旋桨 、 机轮 、 连杆 、 机舱罩、机头罩.

• Design of four - bar linkage is emphasis and difficulty of hydraulic support.

  四 连杆机构 的设计是液压支架设计的重点和难点.

• For this big - end bearing, steel - backed lead or tin shell bearings are used.

  对连杆大头轴承来说, 使用的是铅的钢背或锡的轴瓦式轴承.

• The piston pin joins the piston to connecting rod.

  连结活塞和机器连杆的销.

• Three standard station can realise handle and grooves processing. angle cutting, link - pole.

  标准三个工位,可实现执手空槽冲压,尖角切割, 连杆空槽冲压.