电阻率基本解释

汉语拼音:diàn zǔ lǜ

表示物质导电性能的物理量。用符号ρ表示。在国际单位制中,电阻率在数值上等于长为1米、横截面积为1平方米的一段导体所具有的电阻,即ρ=rsl。电阻率越小,表示导电性能越好,反之亦然。金属的电阻率随温度升高而增大。单位为欧·米。

电阻率双语翻译,电阻率在线翻译例句

    • We can see that the massive vein is revealed by resistivity.

      可以看出,致密的矿脉可用电阻率法来发现.

    • The resistivity is then constant and Ohm's law is obeyed.

      因此电阻率也是常数,并遵循欧姆定律.

    • This is the theoretical expression for the resistivity, and it is in qualitative agreement with experiment.

      这就是电阻率的理论表达式, 它与实验定性地符合.

    • The resistivity contours appear much less diagnostic of anomalous bodies below the surface.

      地面下方的异常体,在视电阻率等值线上并无明显的反映.

    • Let us now consider polarizable bodies whose resistivities are similar to that of the geological environment.

      现在我们来研究电阻率与地质介质相同的极化体.

    • Electrical resistivity is used widely as a measure of brine saturation in rocks.

      电阻率被广泛地用于测量岩石中的矿化水饱和度.

    • EM, like resistivity, can also give structural information: faults, shear or altered conductive areas.

      和电阻率法一样, EM法也能提供构造方面的资料, 如断层 、 剪碎带或蚀变导电带.

    • The phase detecting is very important in resistivity well logging technology.

      复电阻率相位检测技术是目前复电阻率测井技术发展的方向.

    • Surface resistivity: leakage across the surface, a function primarily of surface contaminants.

      表面电阻率: 经过材料表面的泄漏, 主要是表面污染的作用.

    • Figure 4 - 23 is a configuration for measuring surface resistivity.

      图 4-23 是测量表面电阻率的配置情况.

    • Volume resistivity: leakage of current directly through the material.

      体电阻率: 表示直接通过材料的泄漏电流.

    • Moisture will cause the surface resistivity measurements to be lower than normal.

      湿度将使表面电阻率的测量结果比正常情况低一些.

    • Volume and surface resistivity measurements are dependent on several factors.

      体电阻率和表面电阻率的测量决定于几个因素.

    • Surface resistivity is one of the important parameters of thermal control coatings.

      表面电阻率是航天器热控涂层的重要参数之一.

    • The uneven dispersion of CB in foam results in higher volume resistivity.

      另外,炭黑粒子分布的不均匀性导致了海绵的体积电阻率较高.