难检字字典在线查询

汉语拼音：hàn qiāng

气焊用的带活门的工具，形状略像枪，前端有喷嘴。也叫焊炬。

1. 气焊用的带活门的工具。形状略像枪，前端有喷嘴。

2. 用其他热源焊接金属时，直接发生焊接热能的工具。

• Welding torch welding torch, also known as, the role is to combustible gases mixed with oxygen to form a certain flame welding energy.

  手轮焊炬又名焊枪，作用是将可燃气体与氧气混合，形成具有一定能量的焊接火焰。

• A schematic sketch of a welding torch and its gas supply is shown in Figure 6. 2.

  一个焊枪和乙炔气和氧气供应示意图示意图见图6.

• The motion of the transport car can drive a welding gun of the welding machine to align a shearing port to carry out welding.

  输送车的移动可使焊接机的焊枪口对准剪切口进行焊接。

• When left unattended, torches should be isolated by closing the gas cylinder valves, removing the valve keys and depressurizing the hoses .

  当无人在场看管时，应关闭气体钢瓶阀门，取掉阀门扳手，由此将焊枪隔离并将软管卸压。

• As indicated above, through the operation of gun switch, can be self-locking.

  如上所示，通过操作焊枪开关，可以自锁。

• It has been found that the gun was fine in the experiment and the welding piece achieved the request of technology.

  经过实践证明，焊枪在实验过程中使用正常，焊件达到了工艺的要求。

• Welding torch control system and welding fixture control system design theory were covered by the thesis.

  整个焊枪控制系统设计是在松下多轴机器人控制平台下编制而成；

• Use a hole punch, not a torch nor a drill, and punch a hole in the enclosure for the size conduit being used.

  采用打孔机，不要使用焊枪或电钻，在外壳上打出符合导管直径大小的孔。

• Juno suppressed an urge to take the welding tool and ram an other hole through the droid's perforated chest.

  朱诺强忍着才没有拿起焊枪在机器人的胸口再烧一个洞。