In this case the temperature in the furnace is up.
在这种情况下,炉温就升高.
The temperature of the bake box adjusted from 50 ℃ - 300 ℃.
炉温可在50℃ -300 ℃范围内任意可调,操作方便性能稳定.
The furnace temperature must not exceed the highest working temperature 1350 ℃.
炉温不得超过最高工作温度1350℃.
The collecting fundamental of furnace temperature data and grouping situation are expounded.
详细说明炉温数据的收集原则和分组情况.
Preheat an oven up to 220 ℃.
先将炉温预热至220℃.
An improved technique in multivariable temperature control system was offered for high - temperature diffusion furnaces.
针对高温氧化扩散炉设备工艺温度需求,提出了高性能多段炉温控制系统与整定技术.
High - temperature furnace of the kiln liner, kiln cars, door damper, furnace temperature to separate plate.
高温窑炉的窑衬 、 窑车 、 炉门挡板 、 窑炉炉温分隔板.
The precursor made by extrusion can foam at any furnace temperature under the experimental condition.
采用挤压法制备的预制体在不同炉温下均能发泡.
The results show that the main causes are unreasonable charging temperature of ingot.
这种现象是钢锭装炉温度不合理所致.
The influence of temperature on the soaking quality of strip is analysed for the soaking chamber.
分析了均热室炉温对带钢均热质量的影响.
Functions of parameters monitoring, temperature controlling of heating furnace are realized in debugging and running.
系统通过现场调试运行,实现了炉况参数监视, 炉温模糊控制等功能.
Black body furnace temperature time series prediction model based on BPNN was built.
文章在神经网络的基础上,建立了黑体炉温度时序预测模型.
In the temperature control system recreation of the vacuum sintering a advanced temperature controller was used.
利用智能温度控制器,改造了真空烧结炉温度控制系统.
Adjust the temperature of oven down to 80 ℃, keep the bouchees warm and crispy.
将炉温调校至80℃, 保持酥盒暖身、酥脆效果.
A temperature control system of technology testing furnace for vitrified abrasive tools was designed paper.
介绍了陶瓷磨具工艺试验炉温度控制系统的设计方法.