难检字字典在线查询

汉语拼音：jìn jǐ

连续操作（如在木工机械和金工机组）中使得工件移向刀具或刀具移向工件。

1. 增加俸禄。

   唐 白居易 《李益王起杜元颖等赐爵制》：“有司亦能遵我成命，第而次之，进给益封，无有不当。”

• Reduce rapid traverse and federate, and always be ready to shut down the machine immediately if necessary.

  检查加工程序，应使用较小的快速移动速度和进给速度，必要时，时刻准备立即关闭机床

• The thermal medium is fed so that the front edge of the thermal medium moves a second distance from the edge detection sensor.

  热敏介质进给使得热敏介质的前边缘移动距离边缘检测传感器第二距离。

• Machine tool feed system is usually driven by AC servo motor ball screw feed drive to achieve, to simplify the structure.

  机床进给系统现在通常采用交流伺服电动机带动滚珠丝杠来实现进给驱动，简化了传给结构。

• The static and dynamic properties of the CNC drilling machine feeding system is one of the main factors that affect the precision.

  数控钻床进给系统静、动特性是影响加工精度的主要因素之一。

• The feeding speed must be changed with continuousness and a rule, which can let the lathe work well.

  旋切过程中刀刃进给速度必须按一定规律变化才能保证旋切机正常工作。

• Result shows that the controller can achieve the requirements of the ultra-precision machining in the case of uncertainties existed.

  结果显示，在被控对象存存不确定因素的情况下，采用陔控制器能够使伺服进给系统满足超精密加工的要求。

• Up milling (conventional milling). In up milling the workpiece is fed against the direction of cutter rotation, as shown in Fig. 12. 3a.

  逆铣（传统铣削）：在逆铣中，工件逆着铣刀转动的方向进给，如图12.3a所示。

• The error arising out of servo delay should not be ignored on condition that there is a large feed velocity or small curvature radius.

  在大的进给速率或小的曲率半径条件下，伺服滞后所引起的轮廓误差是不可忽视的因素。

• For the same size of billet and finished shape, the total effective strain of ring increases with increasing feed speed.

  同样尺寸的坯料和成品，芯辊进给速度越大，内层的累积等效变形越大；