Thick sections of the laminate can be produced without the risk of cracking.
可生产厚层压板而不会产生裂痕。
Large area of cutting platen makes it possible to cut largesized materials.
◆裁断压板面积大,可冲裁大尺寸材料.
Chemical Supplies, Lamination Material, Stamping Foils, Laminate, Hot Stamp Foil, Paper.
采购产品化学用品, 塑封材料, 冲压箔, 层压板, 热邮票铝箔, 纸张.
Phenolic paper laminated sheet, with high mechanical strength and good machining performance.
酚醛纸层压板,机械强度高,机加工性能好, 机械、电气、电子用.
Working room made of quality stainless steel through stamping Ar - arc - welding. long durability.
优质不锈钢板(或冷压板)经冲压氩弧焊接工艺制作的工作室, 保证产品持久耐用.
Another pressure plate motion mechanism is shown in Figure 3.
另一种压板运动机构见图三.
Quality control of roll formed and curved panels.
负责控制辊压板和曲板的品质.
Keywords: crane, rail clips, design standard.
关键词: 起重机 、 轨道压板 、 设计规范.
Push the anchoring side bars against the pinch weld clamp. Hammer the wedges firmly as shown.
将支承侧杆对着焊接压板夹钳推. 如图所示的那样用锤子将楔子敲紧.
The conception of effective width is proposed to be used in load - bearing capacity of wall element.
焊接薄壁箱形构件板件的宽厚比较大,受压板件出现局部屈曲,可以采用有效宽度的概念确定构件的正截面承载力.
This paper deal with the equations about maximum pressure on closed - circuit track in machine tool.
本文推导出了机床 闭式 导轨面上最大压强的计算公式,该公式适用于任何可能的压板间隙,具有通用性.
Combined with gas pump , pressing plane work table, feeding track, controller and so on.
设备由气缸 、 压板、压台 、 输送轨道 、 控制器等组成.
Phenolic paper laminated sheet, similar to PFCP 201 , but with improved punching characteristics at lower temperature.
酚醛纸层压板, 类似于PFCP201, 但在更低温度下有改进的冲剪性.
The crack ratio was also increased by the restrictive effect of the seasaw and cooling water.
压板及冷却水的拘束作用也使熔敷层裂纹率升高.
Platen backhaul height can be set in a random manner , therefore reducing the spare travel.
压板回程高度可任意设定, 减少了空行程.