The wind load characteristics comprise one of the major reasons for the collapse of industrial buildings during construction.
在施工过程中建筑物所受风荷载的特殊性是导致该在建厂房倒塌的主要原因之一。This idealization would, however, disguise the fact that the thin web beneath the point load is in danger of buckling.
然而，这个理想化的结构不能指出在集中荷载下面薄腹板处于屈曲危险的现象。The vertical load did not help to reduce the lateral displacement at the pile top anymore when it was applied after the lateral load.
先施加水平荷载再施加竖向荷载时，竖向荷载不再起到减小水平荷载作用下桩顶侧移的作用。Less frequently we apply the load directly to the surface by means of hydraulic jacks and distribution plates.
用液压千斤顶与分布板直接施加荷载于表面的方法较不常用。It shows that new type of new heating system is more convenient to install and is able to be effectively reduce the building load.
表明新型的模块式地板辐射采暖系统具有安装更加方便，可以有效的减轻建筑荷载等优点。structure under a given load reinforcement force always tends to minimize the reinforcement force and maximize self-bearing.
给定荷载下结构总是趋于加固力最小化、自承力最大化的状态。Results of the analysis indicated that, this form of support joint is adequate and reliable to bear the maximum design loads.
分析结果表明，该支座节点满足最大设计荷载作用下的承载力要求，安全可靠。It may be observed that this bifurcation phenomenon is somewhat abstract, since it will only arise if KJ is perfectly aligned with the load.
可以发现，分支现象有点抽象，因为它只能发生在KJ与荷载成一条直线的情况下。Then the internal forces of the structure under vertical load were calculated. The D-method was used for calculating the wind load.
然后采用分层法进行竖向荷载作用下的结构内力计算，水平荷载采用D值法进行计算。