旋塞基本解释

汉语拼音:xuán sāi

1.阀的一种。一般安装在压力低﹑口径小的管道上﹐阀上有一个带孔的塞子﹐可用以控制流体的通过。也叫考克。

旋塞详细解释

  1. 阀的一种。一般安装在压力低、口径小的管道上,阀上有一个带孔的塞子,可用以控制流体的通过。也叫考克。

旋塞双语翻译,旋塞在线翻译例句

    • If a water - pipe bursts turn off the stopcock immediately.

      水管破裂时要立即关紧旋塞.

    • Close test cocks and remove tester, return assembly to normal operating condition.

      关闭测试旋塞,拆卸检测器, 将总成恢复到正常的运行环境.

    • Be sure to close test cock before pressurizing valve.

      在重新对阀门加压之前,请确认关闭测试旋塞阀.

    • Install high side hose between test cock No.3 and tester connection A.

      在测试旋塞3号和检测器连接A之间安装高端软管.

    • Close test cocks and remove tester. Return assembly to normal operating condition.

      关闭测试旋塞并拆卸检测器. 将总成恢复到正常工作状态.

    • Bleed test cocks No.2, 3 and 4 to remove any trapped air.

      排放测试旋塞2号, 3号和4号,排除所有残存的空气.

    • Open test cocks drain in cold climates if only operated seasonally.

      如果仅仅是季节性运行,则在寒冷环境下开启测试旋塞.

    • Close test cock No.4. Disconnect bypass hose ( yellow ) at test cock No.4.

      关闭测试旋塞4号. 断开测试旋塞4号上的旁路软管 ( 黄 ).

    • Tighten vent hose at test cock # 1, open test cock # 1.

      紧固测试旋 塞 1号上的排气软管, 开启测试旋 塞 1号.

    • For use with backflow preventer test cocks to protect from damage.

      用于防回流阀测试旋塞,防止受到破坏.

    • Attach vent ( yellow ) hose to TC # 4 and vent needle valve.

      连接排气 ( 黄 ) 软管到测试旋 塞 4号和排气针形阀上.

    • The sealing property is one of the main indicators of kelly stopcock.

      密封性能是方钻杆旋塞阀主要指标之一.

    • Remove vent hose from test cock # 1, open shutoff # 1.

      从测试旋 塞 1号上拆卸排气软管, 开启 关闭阀 1号.

    • Install low side hose between test cock No.3 and tester connection B.

      在测试旋塞3号和检测器连接B之间安装低端软管.

    • Close VA and TC # 4 and remove bypass hose.

      关闭阀门A和测试旋 塞 4号,并且拆卸旁路软管.