难检字字典在线查询

汉语拼音：lún chǐ

在轮周或轮面上的突起部分，能和另一轮上的突起部分相啮合以传递力和运动。

• The wheel engages with the cog and turns it.

  轮子咬住轮齿并带动它转动。

• Exact modeling of gear teeth is based on meshing theory.

  摘要根据齿轮啮合原理,建立了轮齿的精确齿形.

• Today's young people are being forged into cogs in the corporate structure.

  今天的年轻人正被锻造成这个庞大团体结构大转轮上一颗颗轮齿.

• The cogs don't quite mesh.

  这些轮齿啮合不严.

• The teeth of the wheel became disengaged and the machine, out of gear, stopped working.

  轮齿松开了, 机器因齿轮脱开而停止了运行.

• The value of tooth deformation is the key - influencing factor on machining accuracy of tooth profile.

  轮齿的形变情况是决定齿形加工精度的因素.

• Flank: the surface between the pitch circle and the bottom of the tooth.

  齿腹 --- 节圆与齿槽底部之间的轮齿表面.

• The friction heat flow density of single tooth affects temperature distribution of the gear body most.

  单轮齿摩擦热流密度对斜齿轮本体温度分布梯度影响较大.

• Lo screw slot chassis ( cylinder ) wall and stars constitute a closed volume of the tooth.

  螺杆螺槽、机壳 ( 气缸 ) 内壁和星轮齿构成封闭容积.

• When the COGS, forcing it will focus on the tooth surface, and the local Department wear.

  当轮齿啮合时, 息用力不离齐集洋在齿背的局部, 而使该处磨损加重.

• Face : the surface between the pitch circle and the top of the tooth.

  齿面 --- 节圆与齿顶之间的轮齿表面.