难检字字典在线查询

汉语拼音：hàn fèng

焊接金属和母材的接合处，或不用充填金属时母材部件之间的接合处。

焊缝 [hàn fèng]

• An approach is proposed that this deviation can be obtained by using the weld pool image centroid and a Kalman filter.

  为此提出一种利用熔池图像质心和卡尔曼滤波来间接获取电弧与焊缝偏差的方法。

• Where thickness characteristics AT the joint are more important than strength, a thinner welder is possible AT reduced joint strength.

  如果焊缝的厚度比强度更重要，则在降低强度条件下可使焊缝更薄。

• stoppers used for adjusting the size of the welding seam are arranged at the two sides of the rear upper press plier mounting plate.

  所述后上压钳安装板的两侧安装有用于调整焊缝大小的限位螺栓。

• Therefore, developing a seam tracking system, which have good performance and is economical and practical is an urgent problem to be solved.

  因此，研制性能优良、经济实用的焊缝跟踪系统是一个急待解决的问题。

• Also, Make sure to allow a little bit longer on the bottom of the carving design in case it require some trimming when fitting doors.

  并且，在底部雕刻图案的上面留有足够的间隔以备装门时清理焊缝需要。

• The quality and life of weld junctions can be improved through replacing the original weld structure with a tee joint.

  最后，根据有限元的计算结果，将原焊接结构修改为三通结构，可以提高焊缝的焊接质量和使用寿命。

• to avoid distorting of pin boss, it is suggested that the welding sequence of each welding line among lines be as shown in the figure.

  为避免销座扭曲变形，建议各条焊缝的层间焊接顺序如图所示。

• Visual inspection for the surface quality of equipment and weld seams. Review the manufacture's reports.

  目视检查设备和焊缝的外表面质量。检查制造厂的自检报告。

• The practice proves that welding robot can be able to complete site welding technology for various seam of complex workpiece.

  实践证明，该柔性导轨焊接机器人能够较好地完成复杂工件的多种焊缝的现场焊接，尤其是球罐全位置焊接的工艺要求。